Boiler efficiency
According to the Non-domestic building services compliance guide, 2013 edition, published by HM Government, ‘boiler efficiency’ means:
| …the energy delivered by the water as it leaves the boiler (or boilers in multi-boiler installations) to supply the heat emitters, divided by the energy (based on gross calorific value) in the fuel delivered to the boiler, expressed as a percentage. It is an expression of the boiler’s performance and excludes energy used by boiler auxiliary controls, pumps, boiler room ventilation fans, mechanical flue extraction fans and fan dilution systems. The boiler efficiency is measured according to the standards that are used to demonstrate compliance with the Boiler Efficiency Directive. |
Rules of Thumb, Guidelines for building services (5th Edition) BG 9/2011, by Glenn Hawkins, published by BSRIA in 2011, defines boiler efficiency (%) as: ‘…the energy delivered by the water as it leaves the boiler to supply the heat emitters / the energy (based on gross calorific value) in the fuel delivered to the boiler.’
‘Seasonal boiler efficiency (%) is a weighted average of the efficiencies of a boiler at 15%, 30% and 100% of the boiler output.’
[edit] Related articles on Designing Buildings Wiki
- Balanced flue appliance.
- Biomass boiler.
- Carbon monoxide detector.
- CHP boiler.
- Coefficient of Performance CoP.
- Combustion appliance.
- Condensing boiler.
- Domestic building services compliance guide.
- Domestic micro-generation.
- Energy related products regulations.
- Fluepipe.
- Heat generator.
- Heat interface units.
- Heat pump.
- Non-domestic building services compliance guide.
- Types of domestic boiler
Featured articles and news
Scottish parents prioritise construction and apprenticeships
CIOB data released for Scottish Apprenticeship Week shows construction as top potential career path.
From a Green to a White Paper and the proposal of a General Safety Requirement for construction products.
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherited assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.
The 2025 draft NPPF in brief with indicative responses
Local verses National and suitable verses sustainable: Consultation open for just over one week.
Increased vigilance on VAT Domestic Reverse Charge
HMRC bearing down with increasing force on construction consultant says.
Call for greater recognition of professional standards
Chartered bodies representing more than 1.5 million individuals have written to the UK Government.
Cutting carbon, cost and risk in estate management
Lessons from Cardiff Met’s “Halve the Half” initiative.
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.